Ticker

6/recent/ticker-posts

Problems With Internet Connection? Here's How to Fix Your Hacks WiFi





Problems with internet connection can be frustrating. Perhaps there is no internet connection at all even after setting up a Netgear extender or your WiFi keeps dropping leaving you with a loading screen. At times, a slow internet connection gets fixed by itself. However, it is not always the case.


Troubleshooting a problem with internet connection is easy when you know its cause. Maybe you might have changed your location or connected a new device to the home network. Well, these are the most basic reasons. But the internet connection issues come into view when causes are complicated and quite hard to detect.

You don't need to worry at all! This post will take you on a quick tour regarding how to troubleshoot internet connection problems with ease. Let's go.

Reasons Why You're Having Problems With Internet Connection

If you are experiencing issues with your internet connection, you can directly blame your device and also the WiFi router and extender. You can receive 'no internet connection' issue on any device if there is no successful connection established between your device and extender. Some of the router- and extender-related issues are:

Weak signal strength 

Buggy firmware

Damaged cables

Congested WiFi network

Faulty hardware

Improper range extender setup

Quick Tip: You can set up your Netgear WiFi range extender without any issue by accessing mywifiext web-based address.

The chances of facing issues with internet connection due to router and extender are rare. Still, it is a good idea to check your WiFi router and range extender once. Alternatively, in case there is a device-related issue, you will see messages such as 'no internet connectivity' or 'internet not working'.

How To Fix Internet Connection Problems?

Basic Check Points to Follow

The first and foremost thing to do when you come across issues with the internet is to connect your device once again. Prior to delving into the advanced troubleshooting operations, it is wise to check back the preliminary steps mentioned below:

Check whether your Netgear WiFi range extender is plugged in and turned on.

Try restarting your computer and other devices on which you are accessing the internet.

Make sure that the airplane mode on your device is turned off.

Try to connect other devices to your home WiFi network.

Check your monthly subscriptions.

Try visiting multiple websites. At times, you come across particular web pages such as Netgear genie setup that don't open at all.

Once you check all the aforementioned points, try to access the internet on your device.

Switch to a Wired Network

Are you using a WiFi network? Maybe this could be the reason for trouble with internet connection. The majority of the WiFi routers and some Netgear extenders provide support for wired networks as they include an Ethernet port.

So, switching to a wired network can resolve the issue for you. With a cabled internet connection, you can once again create a strong home network.

Reposition the WiFi Extender

Still struggling with no internet connection troubleshooting? If so, try repositioning your WiFi range extender. In your home, there can be some places where you get weak signals. These places are named as dead zones.

Therefore, replace your Netgear WiFi range extender. Ensure that it is kept away from concrete walls, microwaves, refrigerators, cordless phones, baby monitors, etc.

Change the WiFi Band

Maybe the WiFi band you are accessing the internet on is the same as that of your neighbors. As a result, you get around half of the channel bandwidth, bumping you into internet connection issues. 

So, change the WiFi band of your extender. Even some WiFi range extenders support three WiFi bands. For instance, if you have employed Netgear Nighthawk X6 setup in your home, you can select its 2.4 GHz band for web browsing while the remaining two 5 GHz bands for HD streaming and online gaming.

That's how you can get rid of problems with internet connection on your own. Which troubleshooting method has solved your 'no internet connection' issue? Let us know in the comments below.

Is your internet running like a snail? Is your Linksys WiFi disconnecting? Are you facing spotty internet connectivity? If your answer to any of these questions is in yes, then this post is for you. 

Here, we have listed various hacks to fix problems related to your WiFi. Let's get started. 

Today, the internet has become a necessity for everyone. But, when it stops working, it can ruin a lot of your important tasks. Well, worry not! There are many ways employing which you can fix various issues related to your WiFi from your own.

Let's dig a bit deeper and know the solution to things that usually go wrong with WiFi. 

Slow internet in certain areas

If your WiFi device is located in a far corner of your house, then chances are you will face slow internet in other areas that are far from your WiFi device. In order to avoid the issue, consider moving your router to a centralized location. Doing so will help you enjoy a better reception of WiFi throughout the land in your house. 


Besides, if your router is having external antennas, then adjust them properly. Also, switch the channel of your WiFi, if it is overlapping with nearby networks. If none of these ways helps, get an extender to enjoy the intensified signals in every nook and cranny of your home.  

Can't login to router

This is another issue that might be making you annoyed. If so, there can be various reasons for this:

Make sure you have properly plugged in your WiFi device and it is receiving adequate power supply. 

Check if you have followed the proper login process for configuring your router or not?

Sometimes, a cracked Ethernet can also prevent you from logging into your router. So, make sure all the wires are working well and properly installed.

If the default web address is not supporting you to access the login page of your router, try to configure the device using the default IP.

Make sure the web browser you are using to complete the login process is updated to the latest version and is free of clutter like cache, cookies, and browsing history. 

Following these steps may help you fix 'can't login to router' issue. 

WiFi connected, but no internet

Many times users report that their WiFi is connected successfully, but even then they don't have internet access. In such a case, a simple reboot can help you. Simply restart your devices and check if the issue resolved or not. You can get more information from extender.linksys.com website.

If not, power cycle your devices, including modem, router, and PC. To power cycle, simply unplug them from their respective power outlet and then plug in back after some time. If this works, then you are good to go. If still the issue is hampering you, you may have an outage. Better get in touch with your Internet Service Provider. 

WiFi network not showing up on Laptop 

There are various causes that can lead towards WiFi network not showing up. It can be due to:

The incorrect configuration of your router.

The WiFi problem.

An outdated or missing WiFi driver, and many more. 

To fix the issue:

Make sure the WiFi service on your laptop/computer is enabled. 

Turn on the WLAN AutoConfig service. 

Consider updating the WiFi network driver. 

Restart your router and modem.

Make sure your router's WiFi network frequency is matching with the frequency of your computer. 

Enable SSID broadcast for your WiFi. 

Check for WiFi signal interference by other household devices. 

Endnote

That's all about the post! If it helps, share your opinion in the comments section. If your WiFi is still frustrating you, and you are not sure how to fix it, feel free to get in touch with us.


Post a Comment

0 Comments